{"product_id":"litavimo-stotele-lcd-ekranas-autosleep-t12-75-w-yt-82462","title":"SOLDERING STATION T12 TIP 75W (YT-82462)","description":"SOLDERING STATION FOR T12 TIP WITH LCD DISPLAY WITH AUTOSLEEP FUNCTION, 75W POWER\u003cbr\u003eYT-82462\u003cbr\u003eBrand\u003cbr\u003eYato\u003cbr\u003eSymbol\u003cbr\u003eYT-82462\u003cbr\u003eSeries\u003cbr\u003eGRE\u003cbr\u003ePower\u003cbr\u003e75 W\u003cbr\u003eVoltage\u003cbr\u003e110-240 V a.c.\u003cbr\u003eFrequency\u003cbr\u003e50-60 Hz\u003cbr\u003eOperating temperature\u003cbr\u003e90-480 C\u003cbr\u003eTemperature stability\u003cbr\u003e2 C\u003cbr\u003eTip type\u003cbr\u003eT12-JL02, T12-BCM2, T12-K, T2-D16\u003cbr\u003eWarm-up time\u003cbr\u003e6 s\u003cbr\u003eFunctions\u003cbr\u003etemperature stabilization, temperature calibration (range -99 ~ +99 C), device hibernation, automatic shutdown\u003cbr\u003eTemperature setting memory\u003cbr\u003ex3\u003cbr\u003eFuse\u003cbr\u003e6 A \/ 250 V, type F6AL250V\u003cbr\u003eSwitch\u003cbr\u003eYes\u003cbr\u003eAutomatic shutdown\u003cbr\u003e20~999 s\u003cbr\u003eDisplay type\u003cbr\u003eLCD\u003cbr\u003eVoltage supplying the soldering iron\u003cbr\u003e24V d.c.\u003cbr\u003eTip voltage - ground\u003cbr\u003e\u003c2 mV\u003cbr\u003eTip resistance - ground\u003cbr\u003e\u003c2 Ω\u003cbr\u003eCable length\u003cbr\u003e1.05 m\u003cbr\u003eElectrical insulation class\u003cbr\u003eI\u003cbr\u003eWeight\u003cbr\u003e0.47kg\u003cbr\u003eSet contents\u003cbr\u003esoldering station, soldering tip x4 (T12-ILS, T12-JL02, T12-BCM2, T12-K), stand for the iron with a pocket for a brass chip tip cleaner,\u003cbr\u003eSet contents cont.\u003cbr\u003erubber handle for quick replacement of heated tips\u003cbr\u003e\u003cbr\u003eYT-82462 soldering station with LCD display, temperature regulation and calibration, auto sleep function and three memory channels. Works with T12 type tips. T12 tips are a combination of a resistance wire embedded in ceramic, a temperature sensor and a high-quality soldering tip. The integrated tip design enables express heating and very fast temperature stabilization.\u003cbr\u003e\u003cbr\u003eHeating the tip to a temperature of 350C takes only 6 seconds. The soldering iron allows for quick tip replacement, is very pleasant to the touch and has one of the shortest grip distances from the handle to the soldering point, which is useful when performing precise work.\u003cbr\u003e\u003cbr\u003epower: 75W\u003cbr\u003eheater operating voltage: 24V\u003cbr\u003etemperature range: 90 - 480C\u003cbr\u003etemperature accuracy: +- 2C\u003cbr\u003etemperature stabilization\u003cbr\u003etemperature calibration\u003cbr\u003eadjustable auto sleep function: from 20 to 999 seconds\u003cbr\u003eon-off button on the front\u003cbr\u003eThe LCD display informs us about:\u003cbr\u003e\u003cbr\u003ethe set and then the actual tip temperature\u003cbr\u003ecurrently used power of the device in the form of a bar graph\u003cbr\u003ecounter for the auto sleep function\u003cbr\u003etemperature calibration settings\u003cbr\u003eauto sleep settings\u003cbr\u003eswitching the device to auto sleep mode\u003cbr\u003eturning off the device using the button on the front panel\u003cbr\u003eSoldering iron:\u003cbr\u003e\u003cbr\u003etip type: T12\u003cbr\u003equick tip replacement\u003cbr\u003esmall distance between the handle and the soldering point: the tip protrudes only 45 mm\u003cbr\u003ehigh temperature resistant flexible cable\u003cbr\u003ecable length: 1.05 m\u003cbr\u003eweight of the iron with the tip + cable: about 65 g\u003cbr\u003eAccessories included:\u003cbr\u003e\u003cbr\u003efour soldering tips: T12-ILS, T12-JL02, T12-BCM2, T12-K\u003cbr\u003eiron stand with a pocket for a brass shavings tip cleaner\u003cbr\u003erubber handle for quick replacement of heated tips\u003cbr\u003eT12 TIPS: STRENGTHS\u003cbr\u003e\u003cbr\u003eOne of the greatest advantages of tips with an integrated design is the elimination of the problem of air resistance between the soldering tip and the temperature sensor. The temperature sensor in T12 tips is connected in series with the heater* and is located in the soldering tip as close to its tip as possible. Therefore, any change in temperature, e.g. when soldering large elements, is almost immediately read by the temperature stabilization function, which in real time will adjust the power of the device to maintain the set setting.**\u003cbr\u003e\u003cbr\u003eAnother advantage appreciated by many users is the speed of changing the soldering tip, and even the possibility of replacing it without having to wait for the tip to cool down. To do this, simply use a high-temperature-resistant material to grab the heated tip and slide it out of the soldering iron.\u003cbr\u003e\u003cbr\u003eFUNCTION DESCRIPTION\u003cbr\u003e\u003cbr\u003eTemperature stabilization allows you to maintain the set temperature of the tip in various conditions of heat demand to make a proper soldering joint. The tip, depending on the size of the soldered element and the soldering field, gives off more or less heat, and the device, using the built-in tip temperature sensor, constantly reads its real value and compares it to the set one, then increases or decreases power consumption as needed to maintain the set temperature.\u003cbr\u003e\u003cbr\u003eTemperature calibration allows you to calibrate the temperature sensor built into the tip. Depending on the quality, size and degree of wear of the tip, a demanding user can calibrate the sensor himself using a temperature measuring device. Correct reading not only positively affects temperature stabilization but also helps an experienced user avoid the error of overheating the connection in PCB boards.\u003cbr\u003e\u003cbr\u003eAuto sleep\/hibernation of the device allows the station to go into standby mode. Thanks to this, we avoid unnecessary heating of the tip, which significantly extends its life.\u003cbr\u003e\u003cbr\u003eSettings memory allows you to save your favorite temperature settings to three memory channels. After saving, the operator can quickly switch to the previously saved settings.\u003cbr\u003eATTENTION\u003cbr\u003e\u003cbr\u003e*The temperature sensor in the T12 tips is connected in series with the resistance wire\/heater, and communication with the control system takes place via cables powering the heater. Typically, in this type of construction, a special control system cuts off the power to the heater for less than a millisecond, reads the temperature of the tip of the tip and continuously adjusts the power consumption parameters depending on the need. This is a cyclical process and is not noticeable during normal operation, and its effect is to stabilize the temperature of the tip of the tip.\u003cbr\u003e\u003cbr\u003e**For comparison, temperature stabilization in devices with a flask design with a heater and a tip placed on it is delayed by the effect of air resistance. The air in the free space between the tip and the heater must also heat up or cool down, which further prolongs the response of the temperature sensor built into the heater. Stabilization, especially in older designs where the temperature sensor was built into the center of the heating element, worked slowly. Modern irons, such as those in the YT-82456, YT-82458 and YT-82459 devices, have new generation heaters with a special shape and a temperature sensor located at its end. Therefore, the tip adheres well to the heater, and the influence of air resistance on the stabilization function is limited to a minimum.","brand":"Yato","offers":[{"title":"Default Title","offer_id":56525843333502,"sku":"YT-82462","price":69.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5097\/7918\/files\/def933d2320230ffe8c9235b6033afbc.jpg?v=1767534542","url":"https:\/\/irankiuturgus.com\/en-lv\/products\/litavimo-stotele-lcd-ekranas-autosleep-t12-75-w-yt-82462","provider":"irankiuturgus.com","version":"1.0","type":"link"}