ANGLE GRINDER 125MM 1700W (2850-10000 MIN-1) YT-821024 Mark Yato Symbol YT-821024 Series GRF Application cutting and grinding of rolled steel, cast iron, cast steel, hard mineral and composite materials such as porcelain stoneware, concrete, clinker, etc., grinding of stainless steel Set contents angle grinder, additional handle, abrasive disc cover, key for mounting the abrasive disc Turnover 2850-10500 min⁻¹ Mass 2.5kg Tension 230-240 V a.c. Power 1700 W Cable length 3 m Level of security IPX0 Frequency 50 Hz Electrical insulation class II Sound pressure 97.0 ± 3.0 dB(A) Acoustic power 105.0 ± 3.0 dB(A) Electronically adjustable rotation speed Yes Vibrations 4.5 ± 1.5 m/s² Diameter of the abrasive disc 125mm Bore diameter of the abrasive disc 22mm Soft start Yes Spindle thread size M14 One of the most powerful 125mm angle grinders on the market. Designed for cutting rolled steel, cast iron, cast steel, hard mineral and composite materials, for example: porcelain stoneware, concrete, clinker. Thanks to the speed regulation and low speed maintenance system, it is also suitable for grinding stainless steel. The device is equipped with a reinforced gear and a soft start system that ensures a longer engine life. The powerful motor with copper winding is covered with resin to protect against damage. The three-position auxiliary handle is screwed onto the sides or top of the gear cover. The comfortable operation of the grinder is made possible by a 3-meter-long rubber cable. The side switch is handy, durable and allows you to easily turn on the grinder even when wearing work gloves. The outer diameter of the housing is slim, which allows for a safe, secure grip and guidance of the disc along the cutting line. The quick brush replacement system allows replacement without disassembling the entire device. revolutions: 2,850-10,500 rpm abrasive disc diameter: 125 mm abrasive disc hole diameter: 22 mm spindle thread size: M14 weight: 2.5kg cable length: 3 m