• Akcijos ir nuolaidos

    nuolat atnaujinam

  • Greitas pristatymas

    1-3 darbo dienos

  • Atsiėmimas vietoje

    Vilniuje

  • Prekes turime vietoje

    >22 000 pozicijų

Vorel  |  Prekės kodas (SKU): 09170
19% nuolaida

Pistoletas montažinėms putoms (09170)

Akcijos kaina €8.69 Įprasta kaina €10.69


Pristatymas

Ar prekes turite vietoje?

Taip, prekes turime sandėlyje ir nuolat atnaujiname prekių likučius savo internetinėje parduotuvėje. Žinoma, kartais pasitaiko klaidų, todėl jeigu norite būti tikri dėl prekės likučio, maloniai prašome parašyti užklausą info@irankiuturgus.com arba paskambinti +370 635 76667.

Per kiek laiko išsiunčiate prekes?

Užsakymus siuntimui priimame pirmadieniais, trečiadieniais ir penktadieniais iki 12:00.

Pavyzdžiui, jeigu užsakymą spėsite pateikti iki pirmadienio 12:00, jis bus išsiųstas tą pačią dieną, tuo tarpu užsakymas, pateiktas pirmadienį po 12:00, bus išsiųstas trečiadienį.

Atitinkamai, jeigu užsakymą pateiksite antradienį arba trečiadienį iki 12:00, jis bus išsiųstas trečiadienį, o jeigu trečiadienį po 12:00, ketvirtadienį arba penktadienį iki 12:00 - siuntinį Jums išsiųsime penktadienį.

Savaitgalį pateiktus užsakymus siunčiame pirmadienį.

Kada galiu tikėtis gauti savo užsakymą?

Užsakymus kurjeriai paprastai pristato per 1 darbo dieną. Kai užsakymas bus paruoštas siuntimui, gausite elektroninį laišką su siuntos sekimo nuoroda, kurios pagalbą galėsite stebėti savo siuntos būseną.

Ar galiu tikėtis greitesnio pristatymo?

Jeigu turite labai skubų užsakymą, parašykite info@irankiuturgus.com arba paskambinkite +370 635 76667 ir mes pažiūrėsime, ką galime padaryti :)

Atsiėmimas

Ar galima prekes atsiimti vietoje?

Taip, užsakytas prekes galite atsiimti mūsų užsakymų atsiėmimo punkte Vilniuje, B. Sruogos g. 52.

Kaip rasti irankiuturgus.com užsakymų atsiėmimo punktą?

Užsakymų atsiėmimo punktą rasite prie įvažiavimo į kiemą tarp B. Sruogos g. 52 ir B. Sruogos g. 54 namų, kairėje pusėje.

Atidarę medinius vartelius, rasite savo užsakymą su priklijuotu užsakymo numeriu.

Savitarna - tiesiog pasiimkite savo prekę ir uždarykite vartelius. Dėkojame!

Kada mano užsakymas bus paruoštas atsiėmimui?

Užsakymus atsiėmimui priimame pirmadieniais, trečiadieniais ir penktadieniais iki 12:00.

Pavyzdžiui, jeigu užsakymą spėsite pateikti iki pirmadienio 12:00, jį galėsite atsiimti tą pačią dieną, tuo tarpu užsakymas, pateiktas pirmadienį po 12:00, atsiėmimui bus paruoštas trečiadienį.

Atitinkamai, jeigu užsakymą pateiksite antradienį arba trečiadienį iki 12:00, jį atsiimti bus galima trečiadienį, o jeigu trečiadienį po 12:00, ketvirtadienį arba penktadienį iki 12:00 - atsiimti galėsite penktadienį.

Savaitgalį pateiktus užsakymus atsiėmimui paruošime pirmadienį.

Koks užsakymų atsiėmimo punkto darbo laikas?

Užsakymų atsiėmimo punkte - savitarna. Tai reiškia, kad atvykti atsiimti užsakymo galėsite Jums patogiu laiku.

Paprastai užsakymai būna paruošiami atsiėmimui pirmadienį, trečiadienį arba penktadienį nuo 15:00.

Kai užsakymas jau bus paruoštas atsiėmimui, gausite elektroninį laišką.

Ar galiu tikėtis greitesnio atsiėmimo?

Jeigu turite labai skubų užsakymą, parašykite info@irankiuturgus.com arba paskambinkite +370 635 76667 ir mes pažiūrėsime, ką galime padaryti :)

Gamintojas:

Vorel

Aprašymas

The gun is made of stainless steel and brass and resistant plastics. Some elements are protected against aggressive foams by a PTFE / Teflon layer. For applying foams from typical screw-in containers.
Purpose / application
The gun is intended for applying polyurethane foam during construction, assembly and insulation works.
Usage
1. Getting started
Shake the foam container vigorously for about 15 seconds. Lock the trigger lever by turning it counterclockwise so that the lever arm is in the notch on the gun housing. Remove the lid from the container, and then screw the container into the gun until you feel resistance. Any minor foam leaks should be washed off immediately with a polyurethane foam cleaner. Unlock the trigger lever by turning clockwise. Press the trigger and fill the gun with foam. The gun is ready for use. The foam stream flows out when the trigger lever is pressed. Releasing the pressure of the trigger lever stops the flow of foam.

2. Activities after finishing work
Lock the trigger lever by turning it counterclockwise so that the lever arm is in the notch on the gun housing. It is recommended not to unscrew the foam container from the gun. Make sure that the gun is always screwed on, though partly filled, to keep the foam inside the gun under pressure. This prevents foam from drying inside the gun. If the gun has been out of use for more than a month, clean the gun with a mounting foam cleaner. Do not allow foam to dry inside the gun. Dried foam can only be removed mechanically.

3. Reusing the gun
Shake the gun strongly with the container attached for about 15 seconds. Using a sharp knife, cut off the tip of the hardened foam. Unscrew the adjustment screw counterclockwise and release enough foam to make the flow uniform. After this, the gun is ready for use.

4. Replacing the container
If foam has stopped coming out of the container, replace it with a new one. To find out if the container is completely unobstructed, point the nozzle towards the dust container and push the trigger lever until the gun nozzle is completely free. Install a new container immediately without cleaning the gun and proceed as described in step 1.

5. Cleaning the gun
Unscrew the container from the gun. Attach the spray tip to the cleaning agent container and clean the residual fresh foam on the gun. Remove the spray tip and screw the detergent container into the gun. Proceed in the same way as for the foam container (item 1). Fill the gun with cleaning agent and leave for about 10 minutes. Press the trigger again and clean the inside of the gun with fresh cleaner. Unscrew the container with the cleaning agent. Using a cloth, remove cleaning agent residue from the container and gun connection
and cover them with a thin layer of petroleum jelly. Do not clean the gun with corrosive agents. With continuous use of the gun, clean the gun in the manner described above every 2-3 months
parameters
Surface finish: PTFE coating

Mokėjimo būdai

  • American Express
  • Apple Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Jūsų mokėjimo informacija yra apdorojama saugiai. Mes nesaugome kredito kortelės duomenų ir neturime prieigos prie Jūsų kredito kortelės informacijos.