INVERTER WELDER MMA WITH PFC 200A (YT-81358)
Before 12:00 noon – dispatch the same business day*
Lithuanian time. COD: from receipt of the order; advance payment: from receipt of payment. Later orders and non-working days: next business day. Palletised / oversized goods may need 1 additional business day.
- 30-day return guarantee
- Self-service collection in Vilnius, 24/7 after the ready notification
Delivery
Delivery
We prepare orders every business day
Orders received and paid for before 12:00 noon Lithuanian time on a business day are dispatched or prepared for collection that business day. Orders received or paid for at or after 12:00 are prepared and dispatched on the next business day.
For cash on delivery (COD), the cut-off is based on when we receive the order. For bank transfers and other advance payments, it is based on when we receive payment for the submitted order.
Orders received or paid for at weekends, on Lithuanian public holidays or other statutory non-working days are prepared on the next business day. We announce any additional closures or holidays on our website.
Palletised and oversized goods may require one additional business day. Special-order products follow the lead time stated on the product page; the usual 0–1-business-day preparation time does not apply to them.
Carrier transit time starts at dispatch, not at order placement. Carrier working days and public holidays in the destination country may affect the delivery date.
Preparation examples
- A regular-stock order received and paid for before 12:00 on Monday is prepared on Monday; at or after 12:00 – on Tuesday.
- A regular-stock order received and paid for before 12:00 on Friday is prepared on Friday; at or after 12:00 or over the weekend – on Monday, provided it is a business day.
- If the expected preparation day is a public holiday or another non-working day, preparation moves to the next business day. Palletised and oversized orders may take one further business day.
- For COD orders, only receipt of the order before the cut-off is required in these examples.
Typical carrier transit time after dispatch: Lithuania – 1 business day; Latvia – 1 business day; Estonia – 1–2 business days; Finland – 3–5 business days. We deliver only to countries offered at checkout. Carrier delays can extend these estimates.
For questions or an urgent order, contact: info@irankiuturgus.com, +370 635 76667.
Pickup
Pickup
Collection in Vilnius
Collection in Vilnius: B. Sruogos g. 52. Enter through the wooden gate between numbers 52 and 54; identify your parcel by its order number. Self-service collection is available 24/7, but please come only after receiving confirmation that your order is ready. Collection is available around the clock; orders are prepared on business days.
We prepare orders every business day
Orders received and paid for before 12:00 noon Lithuanian time on a business day are dispatched or prepared for collection that business day. Orders received or paid for at or after 12:00 are prepared and dispatched on the next business day.
For cash on delivery (COD), the cut-off is based on when we receive the order. For bank transfers and other advance payments, it is based on when we receive payment for the submitted order.
Orders received or paid for at weekends, on Lithuanian public holidays or other statutory non-working days are prepared on the next business day. We announce any additional closures or holidays on our website.
Palletised and oversized goods may require one additional business day. Special-order products follow the lead time stated on the product page; the usual 0–1-business-day preparation time does not apply to them.
Carrier transit time starts at dispatch, not at order placement. Carrier working days and public holidays in the destination country may affect the delivery date.
Preparation examples
- A regular-stock order received and paid for before 12:00 on Monday is prepared on Monday; at or after 12:00 – on Tuesday.
- A regular-stock order received and paid for before 12:00 on Friday is prepared on Friday; at or after 12:00 or over the weekend – on Monday, provided it is a business day.
- If the expected preparation day is a public holiday or another non-working day, preparation moves to the next business day. Palletised and oversized orders may take one further business day.
- For COD orders, only receipt of the order before the cut-off is required in these examples.
For questions or an urgent order, contact: info@irankiuturgus.com, +370 635 76667.
INVERTER WELDER MMA WITH PFC 200A (YT-81358)
Manufacturer:
Yato
Description
Description
MMA INVERTER WELDING MACHINE WITH PFC 200A
Mark
Yato
Symbol
YT-81358
Type of welding machine
PFC, IGBT
Max. welding current
85 (MMA), 200 (TIG lift) A
Min. welding current
10 (MMA), 10 (TIG lift) A
Tension
115, 230 V a.c.
Frequency
50/60 Hz
Power factor
0.93
Dimensions
350x138x270mm
Electrode diameter
1.6~4mm
Duty cycle
15 (MMA), 25 (TIG lift) %
Power source efficiency
80%
CPU processor
Yes
VRD voltage reduction system
Yes
Arch stabilization
Yes
Hot start
Yes
Display type
LCD, segmented
Overheating protection
Yes
Short circuit protection function
Yes
Possibility of power supply from a generator
Yes
Winding insulation class
F
Electrical insulation class
AND
Level of security
IP21
Mass
6.19kg
Set contents
welding machine, grounding clamps 300 A, 3 m (16 mm2), electrode holder 200 A, 3 m (16 mm2), power cable 2.5 m, shoulder strap
Application
welding with coated electrodes (MMA method) with direct current and non-consumable electrodes (TIG lift method) with direct or pulsed current - acidic, basic and cellulose
Application continued
steel, stainless steel, cast iron, copper, aluminium and others.
Welding method
MMA, TIG lift, TIG lift with pulse
3 417 / 5 000
Translation results
Translation result
MMA 200A PFC inverter welding machine with a power factor correction module, advanced functions and the option of DC TIG LIFT welding with pulse. The PFC module reduces interference transmitted to the network and lowers passive energy consumption. As a result, we minimize the risk of welding repairs in places with sensitive electronics, and we will also use the full potential of the welder (maximum amperage) even with a 50-metre extension cord. Suitable for rutile, cellulose and alkaline electrodes.
Basic information:
Welding current: 10-200A
Recommended electrode diameter: 1.6-4.0mm
Electrode holder up to 200A, cable cross-section 16mm2, length 3 metres
Mass holder up to 300A, cable cross-section 16 mm2, length 3 metres
Power cord: H07RN-F 3G2.5mm2, length 2.5 metres
Efficiency: 80%
Power factor: 0.93
Adjustable shoulder strap
Dimensions: 350X138X270mm
Weight: 6.2kg
PFC module:
Reduces energy consumption and limits current harmonics. The YT-81358 at a maximum setting of 200A will draw 7.1 kVA. A welder with the same welding current, without a PFC module, will consume approximately 9.9 kVA. Almost 3 kVA more at 230V supply voltage is a huge problem for both the electrical installation and power generators. In many cases, the maximum amperage of the welding machine will not be possible to achieve due to the activation of the installation's overcurrent protections, high voltage drop (especially for installations with a cable cross-section of less than 4 mm2), or throttling of the generator.
Functions:
DC Pulse
Real Hot Start with regulation
Real Arc Force with adjustment
Anti stick
VRD
Voltage modes for basic, cellulose and acid electrodes
Overheating protection, fan on demand
Function description:
DC pulse - welding with pulsed current. The welding current alternates between base and peak levels in an orderly manner. This reduces the overall heat input to the welded material and reduces spatter. Makes it easier to weld metals with high thermal conductivity, as well as thinner metals, without burning them/burning holes. Additionally, you can achieve narrower and deeper welds on thicker metals. The YT-81358 model has an adjustable pulse frequency in the range from 1 to 100 Hz and the peak and base current power values relative to the algorithm for a given setting in the range from 10 to 50%.
Hot start - when the electrode is placed on the material to be welded, the welder increases the welding current for a fraction of a second, which makes it much easier to ignite the arc. The YT-81358 model allows you to adjust the function in the range of 0-50% and its operation time from 0.0 to 2.0s.
Arc force - regulates the dynamics of the arc depending on the distance of the electrode from the welded element. The YT-81358 model has adjustable parameters of this function in the range of -15 to +15%.
Anti stick - cuts off the welding current when the electrode is short-circuited, which allows the electrode to be separated from the welded material.
VRD - the function reduces the no-load voltage from approximately 60V to a level that is safe for humans. The YT-81358 model has the ability to turn the VRD function on and off.
Electrode modes - automatic regulation of output voltage for different types of electrodes. The YT-81358 model has dedicated settings for basic (E7018), cellulose (E6010) and rutile (E6013) electrodes.
Overheating protection (fan on demand) - the microprocessor in the YT-81358 checks the temperature of critical components in real time. Depending on the temperature, it turns on and controls the fan speed.
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
